Zoom B2 FOUR User Manual

2 3
Effect Types and Parameters
[ DYNAMICS ]
DYNAMIC
COMPRESSOR
This is a simulation of the MXR Dyna Comp.
Added parameters allow you to adjust the tone and the compressor attack speed.
SENSE Adjusts the sensitivity of the effect. 0 – 10
ATTACK Sets compressor attack speed to FAST or SLOW. SLOW, FAST
TONE Adjusts the tone. 0 – 100
VOL
Adjusts the volume. 0 – 100
BLACK
OPTICAL
COMPRESSOR
This is a simulation of the Demeter COMP-1 Compulator.
Added parameters allow you to adjust the tone.
COMP Adjusts the depth of the compression. 0 – 100
LO Adjusts volume of low frequencies. 0 – 100
HI Adjusts volume of high frequencies. 0 – 100
VOL
Adjusts the volume. 0 – 100
OPTICAL
COMPRESSOR
This is an optical compressor.
DRIVE Adjusts the depth of the compression. 0 – 10
LO Adjusts volume of low frequencies. 0 – 100
HI Adjusts volume of high frequencies. 0 – 100
VOL Adjusts the volume. 0 – 100
DUAL
COMPRESSOR
This is a compressor which allows separate settings for the low frequency and high
frequency range.
FREQ Adjusts the crossover point between the high frequency and low frequency range.
300 Hz –
1.5 kHz
LOCOMP Adjusts the compression depth in the low frequency range. 0 – 50
HICOMP Adjusts the compression depth in the high frequency range. 0 – 50
VOL
Adjusts the volume. 0 – 100
MULTIBAND
COMPRESSOR
This is a simulation of the MultiComp (MODE:MB).
COMP Adjusts the depth of the compression. 0 – 100
LOTHR Adjusts the threshold that triggers the low-frequency effect. 0 – 100
HITHR Adjusts the threshold that triggers the high-frequency effect. 0 – 100
VOL
Adjusts the volume. 0 – 100
GLAM
COMPRESSOR
This compressor becomes a glamorous tone as increasing the Shape parameter.
Also, you can mix the original sound.
COMP Adjusts the depth of the compression. 0 – 100
SHAPE Emphasizes high and low frequencies. 0 – 10
VOL Adjusts the volume. 0 – 100
DRY
Adjusts the volume of the unaffected sound. 0 – 100
160
COMPRESSOR
This compressor is in the style of the dbx 160A.
THRSHLD Adjusts the threshold that determines when the effect is activated. -60 – 0
RATIO Adjusts the compression ratio. 1.0 – 10.0
KNEE Sets the type of knee. SOFT, HARD
VOL
Adjusts the volume. 0 – 100

Zoom B2 FOUR Specifications

General

Type	Bass Multi-Effects Processor
MIDI I/O	No
Presets	50 user presets, 50 factory presets
Amp Modeling	Yes
Inputs	1 x 1/4" Instrument
Power Source	4 x AA batteries
Display	LCD
Outputs	1 x 1/8" headphone output