Zoom B2 FOUR User Manual

14 15
Effect Types and Parameters
[ DELAY ]
DELAY This long delay has a maximum length of 4000 ms.
TIME Sets the delay time. 1 – 4000
MODE
Sets the delay time range.
When metronome is chosen, the delay time is synchronized to the tempo.
SHORT,
LONG,
REPEAT Adjusts the number of repeats. 0 – 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
ANALOG
DELAY
This analog delay simulation has a long delay with a maximum length of 4000 ms.
TIME Sets the delay time. 1 – 4000
MODE
Sets the delay time range.
When metronome is chosen, the delay time is synchronized to the tempo.
SHORT,
LONG,
REPEAT Adjusts the number of repeats. 0 – 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
TAPE ECHO
This effect simulates a tape echo. Changing the "Time" parameter changes the pitch of
the echoes.
TIME Sets the delay time. 1 – 2000
MODE
Sets the delay time range.
When metronome is chosen, the delay time is synchronized to the tempo.
SHORT,
LONG,
REPEAT Adjusts the number of repeats. 0 – 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
DUAL DELAY This effect combines 2 delays and is based on the Eventide TimeFactor DigitalDelay.
TIMEA Adjusts the delay time of Delay A. 0 – 1490
TIMEB Adjusts the delay time of Delay B. 0 – 1490
MODE
Sets the delay time range.
When metronome is chosen, the delay time is synchronized to the tempo.
TIME,
BALANCE Adjusts the balance between original and effect sounds. 0 – 100
REP A Adjusts the number of Delay A repeats. 0 – 110
REP B Adjusts the number of Delay B repeats. 0 – 110
DLYMX Adjust the mix of the Delay A and B effect sounds. 0 – 100
DEPTH Sets the depth of the modulation. Also sets the output to mono (M0.M50) or stereo (S0.S50).
MN-0 –
ST-50
REVERSE
DELAY
This reverse delay is a long delay with a maximum length of 2000 ms.
TIME Sets the delay time. 10 – 2000
MODE
Sets the delay time range.
When metronome is chosen, the delay time is synchronized to the tempo.
SHORT,
LONG,
REPEAT Adjusts the number of repeats. 0 – 100
BALANCE Adjusts the balance between original and effect sounds. 0 – 100
MODULATION
DELAY
This delay effect allows the use of modulation.
TIME Sets the delay time. 1 – 2000
MODE
Sets the delay time range.
When metronome is chosen, the delay time is synchronized to the tempo.
SHORT,
LONG,
REPEAT Adjusts the number of repeats. 0 – 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100

Zoom B2 FOUR Specifications

General

Type	Bass Multi-Effects Processor
MIDI I/O	No
Presets	50 user presets, 50 factory presets
Amp Modeling	Yes
Inputs	1 x 1/4" Instrument
Power Source	4 x AA batteries
Display	LCD
Outputs	1 x 1/8" headphone output