Zoom B2 FOUR User Manual

8 9
Effect Types and Parameters
[ DRIVE ]
BASS FUZZ
SMILE
This models a FUZZ FACE. An added parameter allows you to adjust the balance of
original sound and distortion.
GAIN Adjusts the gain. 0 – 100
TONE Adjusts the tone. 0 – 100
BALANCE Adjusts the balance between original and effect sounds. 0 – 100
VOL Adjusts the volume. 0 – 100
BASS METAL
DRIVE
This models a BOSS Metal Zone. An added parameter allows you to adjust the
balance of original sound and distortion.
GAIN Adjusts the gain. 0 – 100
TONE Adjusts the tone. 0 – 100
BALANCE Adjusts the balance between original and effect sounds. 0 – 100
VOL Adjusts the volume. 0 – 100
TS+BOOST
DRIVE
This effect combines TS Drive and Booster.
GAIN Adjusts gain of TS Drive. 0 – 100
TONE Adjusts tone of TS Drive. 0 – 100
VOL Adjusts volume of TS Drive. 0 – 100
COMP Sets the clipping type of TS Drive. 0 – 2
BOOST Adjusts gain of Booster. 0 – 100
BASS Adjusts low frequencies volume of booster. 0 – 100
TREBLE Adjusts high frequencies volume of booster. 0 – 100
ORDER Set the connection order of TS Drive and Booster.
BOOST-OD,
OD-BOOST
[ PREAMP ]
BASS
DRIVER
PREAMP
This is a simulation of the SansAmp BASS DRIVER DI.
BASS Adjusts volume of low frequencies. 0 – 100
TREBLE Adjusts volume of high frequencies. 0 – 100
PRESENC Adjusts volume of super-high frequencies. 0 – 100
BLEND Adjusts the balance between the original sound and the effected sound. 0 – 100
GAIN Adjusts the gain. 0 – 100
VOL Adjusts the volume. 0 – 100
MID-FREQ Adjusts the center frequency of the mid-range.
500 Hz, 1.0 kHz
MID Adjusts the volume of middle frequencies. 0 – 100
D.I PLUS
PREAMP
This is a simulation of the MXR Bass D.I.+, which has both clean and distortion
channels.
BASS Adjusts volume of low frequencies. 0 – 100
MID Adjusts the volume of middle frequencies. 0 – 100
TREBLE Adjusts volume of high frequencies. 0 – 100
COLOR This turns the preset EQ ON or OFF for the clean channel. OFF, ON
CHANNEL Switches between clean and distortion channels. CLEAN, DIST
BLEND
Adjusts the balance between the original sound and the effected sound for the distortion
channel.
0 – 100
GAIN Adjusts the gain of the distortion channel. 0 – 100
VOL Adjusts the volume. 0 – 100

Zoom B2 FOUR Specifications

General

Type	Bass Multi-Effects Processor
MIDI I/O	No
Presets	50 user presets, 50 factory presets
Amp Modeling	Yes
Inputs	1 x 1/4" Instrument
Power Source	4 x AA batteries
Display	LCD
Outputs	1 x 1/8" headphone output