Zoom B2 FOUR - Bass Amp; Fliptop; AmpG SVT; AG 750

18 19
Effect Types and Parameters
[ BASS AMP ]
FLIPTOP This models the sound of the Ampeg B-15N bass amplifier.
BRIGHT Adjusts the high-frequency character. OFF, ON
TREBLE Adjusts volume of high frequencies. -20.0 – 20.0
MID Adjusts volume of middle frequencies. -20.0 – 20.0
BASS Adjusts volume of low frequencies. -20.0 – 20.0
GAIN Adjusts the gain. 0 – 100
ULTRA Emphasizes high and low frequencies.
OFF, HI, LOW,
BOTH
VOL Adjusts the volume. 0 – 100
BLEND Adjusts the balance between the original sound and the effected sound. 0 – 100
AMPG SVT This models the sound of the Ampeg SVT.
BASS Adjusts volume of low frequencies. -20.0 – 20.0
MID-FREQ Adjusts the center frequency of the mid-range.
32 Hz – 6.3 kHz
MID Adjusts volume of middle frequencies. -20.0 – 20.0
TREBLE Adjusts volume of high frequencies. -20.0 – 20.0
GAIN Adjusts the gain. 0 – 100
ULTRA Emphasizes high and low frequencies.
OFF, LOW, HI,
BOTH, CUT
VOL Adjusts the volume. 0 – 100
BLEND Adjusts the balance between the original sound and the effected sound. 0 – 100
AG 750 This models the sound of the Aguilar DB 750.
BASS Adjusts volume of low frequencies. 0 – 100
MID Adjusts volume of middle frequencies. 0 – 100
TREBLE Adjusts volume of high frequencies. 0 – 100
GAIN Adjusts the gain. 0 – 100
BRIGHT Adjusts the high-frequency character. OFF, ON
DEEP Adjusts the low-frequency character. OFF, ON
VOL Adjusts the volume. 0 – 100
BLEND Adjusts the balance between the original sound and the effected sound. 0 – 100
SMR400 This models the sound of the SWR SM-400.
BASS Adjusts volume of low frequencies. -15.0 – 15.0
MID-FREQ Adjusts the center frequency of the mid-range.
32 Hz – 6.3 kHz
MID Adjusts volume of middle frequencies. -15.0 – 15.0
TREBLE Adjusts volume of high frequencies. -15.0 – 15.0
GAIN Adjusts the gain. 0 – 100
ENHANCE This tone control changes the frequency and level according to the knob position. 0 – 100
VOL Adjusts the volume. 0 – 100
BLEND Adjusts the balance between the original sound and the effected sound. 0 – 100
EBH360 This models the sound of the EBS HD360 bass amplifier.
BASS Adjusts volume of low frequencies. -10.0 – 10.0
MID Adjusts volume of middle frequencies. -10.0 – 10.0
TREBLE Adjusts volume of high frequencies. -10.0 – 10.0
BRIGHT Adjusts the high-frequency character. 0 – 100
DRIVE Adjusts the gain. 0 – 100
VOL Adjusts the volume. 0 – 100
CHARA Emphasizes high and low frequencies. OFF, ON
BLEND Adjusts the balance between the original sound and the effected sound. 0 – 100