24
connecting a hub or a switch, this is typically called an Uplink or Expansion port.) If
you are connecting a computer or game station, go to step 5 of this section.
3 If you are connecting a network device such as a switching hub, use the instructions
that came with that device. Then reboot any computer that is part of your network.
For example, if you connected a switching hub, reboot any computer that will be
connected to that switching hub.
4 If you are connecting a HomePlug adapter pair with one adapter plugged into the
Cable Modem/Router and an AC outlet, and the other adapter plugged into a
computer, game station, or other device and an AC outlet, make those connections
and then go to step 5.
5 Verify that your Internet connection is working. Open a Web browser on each
computer that’s using your network and try to connect to a familiar Web address.
6 Congratulations! You have connected an additional device to the Internet. You can
connect up to 4 Ethernet-capable devices to the Cable Modem/Router, following the
instructions above for each device by starting at step 2 of this section.
To Next Page
Loading...
