Zoom Cable Modem/Router - Page 67


67
 To specify a RIP unicast destination IP address, enter the IP address and subnet
mask.
Table 14. RIP Setup Menu Option
Option Description
RIP Authentication
Check this box to enable RIP authentication for
routing protocols
RIP Authentication Key
Enter the set of keys for your interface.
RIP Authentication Key ID
Enter the ID to identify the key used to create the
authentication data.
RIP Reporting Interval
Enter the interval at which to update routing table.
RIP Destination IP Address
Enter the destination IP address for RIP.
RIP Destination IP Subnet Mask
Enter the subnet mask for the destination IP
address.