79
Table 20. User Setup Menu Option
Option Description
User
Configuration
Enter a user name (e.g. Mom, Dad, Bro, Sis) and click Add User.
Users Settings
Select a user from the drop-down list. Click the checkbox to enable
parental control for this user.
Password
Enter the password for this user.
Re-Enter
Password
Re-enter (confirm) the password for this user.
Trusted User
Select Enable to grant this user access to all Internet content
regardless of any policy or time settings.
Content Rule
Select the content policy for this. The content policy is defined in the
Parental Control - Basic page.
White List Only
Click this checkbox to limit the user to visit only the sites specified in
the Allowed Domain List (see Parental Control - Basic page) of
his/her content policy.
Time Access
Rule
Select the access time rule for this user. The content policy is
defined in Parental Control - ToD Filter page.
Session
Duration
Enter the session duration time to limit this user’s Internet access
time.
Inactivity Time
Configure the inactivity timeout for this user to re-login. If there is no
Internet activity for the specified amount of time (in minutes), the
user must login again to continue using the Internet.
When all above information has been entered, click the Apply button to activate these
settings. Repeat for each user.
Trusted
Computers
Enter the MAC address of a computer or other device to bypass the
login requirement. This computer or device will always have access
as defined by the User profile above.
The Mac Addresses of the computers attached to your network can
be found in the DHCP Clients table. To access the DHCP Clients
table click on Basic on the menu bar then DHCP.
When the above information has been entered, click the Apply button to activate these
settings. Repeat for each user.
To Next Page
Loading...
Need help?
General
