ZOOM GFX-707
MOD ( modulation) module
18
Effect Types and Parameters
This module comprises spatial effects such as chorus and flanger, filter effects such as auto wah, and modulation effects such as ring
modulator.
This stereo chorus effect produces a clear and very wide sound
stage.
Adjusts effect depth.
Adjusts modulation speed.
Adjusts effect mix ratio.
This chorus effect is characterized by warm and smooth sound.
Adjusts effect depth.
Adjusts modulation speed.
Adjusts effect mix ratio.
This effect produces a unique, undulating sound.
Adjusts effect depth.
Adjusts modulation speed.
Adjusts feedback level. Increasing this value in the plus or minus
direction emphasizes the distinctiveness of sound, but with
different tonal character.
This effect results in a swooshing sound.
Selects connection order of COMP•DIST module and MOD
module, as follows.
AF:
COMP•DIST →MOD
bF:
MOD →COMP•DIST
Adjusts modulation speed.
Selects phase sound type.
This effect periodically varies the level of the sound.
Adjusts effect depth.
Adjusts modulation speed.
Adjusts modulation waveform clip. Larger values result in more
intense modulation.
This stereo panning effect periodically moves the sound back and
forth between the right and left channel.
Adjusts effect width.
Adjusts modulation speed.
Adjusts modulation waveform clip.
This effect gives a varying wah sound that depends on the
picking intensity.
Selects connection order of COMP•DIST module MOD module,
as follows.
AF:
COMP•DIST →MOD
bF:
MOD →COMP•DIST
Adjusts wah effect intensity.
Adjusts sensitivity. Negative values result in downward wah.
This effect lets you control wah with the expression pedal.
Selects connection order of COMP•DIST module and MOD
module.
Adjusts wah effect center frequency.
Adjusts original sound mix.
For the MODE parameter of the PEDAL module ( p. 20),
"Hi" and "Lo" is equivalent to "dn".
This is a special effect with step-like filter characteristics.
Adjusts depth.
Adjusts modulation speed.
Adjusts effect intensity.
This is a pitch shifter with a range of 1 octave up and 2 octaves
down.
Sets the pitch shift amount. The "dt" setting results in a detune
effect.
Adjusts effect tone.
Adjusts balance between effect sound and direct sound. Higher
values emphasize effect sound.
This effect lets you vary the pitch in real time, using the
expression pedal.
Selects the pedal pitch type. Depending on the type, the pitch
when pushing the pedal down or when raising it differs.
Adjusts effect tone.
P-PIT (Pedal Pitch)
TYPE 11
PITCH (Pitch Shifter)
TYPE 10
STEP
TYPE 9
P-WAH (Pedal Wah)
TYPE 8
A-WAH (Auto Wah)
TYPE 7
A-PAN (Auto Pan)
TYPE 6
TREMOL (Tremolo)
TYPE 5
PHASE
TYPE 4
FLANGE (Flanger)
TYPE 3
V-CHO (Vintage Chorus)
TYPE 2
CHORUS
TYPE 1
DEPTH 0 – 10Parameter 1
RATE 1 – 30Parameter 2
MIX 0 – 30Parameter 3
DEPTH 0 – 10Parameter 1
RATE 1 – 30Parameter 2
MIX 0 – 30Parameter 3
DEPTH 0 – 10Parameter 1
RATE 1 – 30Parameter 2
FB -10 – 10Parameter 3
TOPDEPTH 0 – 10Parameter 1
RATE 1 – 30Parameter 2
CLIP 0 – 10Parameter 3
WIDTH 0 – 10Parameter 1
POSI AF, bFParameter 1
RATE 1 – 30Parameter 2
CLIP 0 – 10Parameter 3
POSI AF, bFParameter 1
RATE 1 – 30Parameter 2
COLOR 1 – 4Parameter 3
RESO 1 – 10Parameter 2
SENS -10 – -1, 1 – 10Parameter 3
POSI AF, bFParameter 1
FREQ 1 – 10Parameter 2
DIRMIX 0 – 10Parameter 3
DEPTH 0 – 10Parameter 1
RATE 1 – 30Parameter 2
RESO 0 – 10Parameter 3
PITCH
-12, ...- 1, dt, 1,... 12, 24
Parameter 1
TONE 0 – 10Parameter 2
BAL 0 – 30Parameter 3
TYPE 1 – 16Parameter 1
TONE 0 – 10Parameter 2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
-100 cent
Original sound only
DOUBLING
Detune + DRY
0 cent
+1 octave
0 cent
-2 octaves
-1 octave + DRY
+1 octave + DRY
-700 cent + DRY
500 cent + DRY
-
∞
(0 Hz) + DRY
+1 octave
-
∞
(0 Hz) + DRY
+1 octave + DRY
Original sound only
-100 cent
Detune + DRY
DOUBLING
+1 octave
0 cent
-2 octaves
0 cent
+1 octave + DRY
-1 octave + DRY
500 cent + DRY
-700 cent + DRY
+1 octave
-
∞
(0 Hz) + DRY
+1 octave + DRY
-
∞
(0 Hz) + DRY
Pedal
minimum value
Pedal
maximum value
P-PIT
TYPE