RT60 Rough Terrain Crane 04 - 3
Make sure that the system operating gauges and indicators, and warning signals
function.
Keep all the glazed surfaces, instruments, windows, and lights clean.
Remove all oil, grease, mud, ice, and snow from walkway surfaces.
Read and understand all Decals and Warnings.
Keep all tools and other necessary items in the toolbox.
Do not lift a load without a Load Ratings in the cab.
Read and understand the Load Ratings.
Make sure that the load to lift is less than the capacity of the crane.
Be in good physical condition and free from effects of alcohol, drugs and medications.
Be sure to not decrease vision, hearing, or reaction time.
Keep personnel, equipment and material that are not necessary for your task at the
job-site out of the area.
The operator must know the hand signals.
When the view of the operator is blocked or if the task is in a dangerous area, use
signal personnel to give directions.
If a signal person is necessary, the operator must obey only the signals from the
approved signal person. You must obey the STOP signal from all personnel in the
area.
Keep a fully charged fire extinguisher and first aid kit in the cab at all times. The
operator must know how to use the fire extinguisher and how to apply the items in the
first aid kit.
Look for the movement of other equipment, trucks, and personnel at the job-site.
Personnel must stay off the crane platform while the crane is in operation.
All personnel must be in a safe area before you move the hook, boom, load, or
outriggers.
Stop and start the movement of the load smoothly and move at a speed that keeps the
load in your control.
Keep a minimum of three full wraps of wire rope on the drum.
Use the tag lines to keep the load in control.
Keep the load near the ground.
Use the shortest boom possible.
If a load is off the ground or the crane is on, you must stay in the cab.
Always use outriggers as the Load Ratings and Operator’s Manual tells.
To Next Page
Loading...
Need help?
General
