09 - 6 RT60 Rough Terrain Crane
9.4 TECHNICAL SPECIFICATION
INTRODUCTION
RT60 rough terrain crane is of wide tread, short wheelbase, high stability, small turning
radius and 360° swing function, which can carry out “On Tires” Lifts in narrow areas and
has the ability to pick-and-carry loads.
It can be widely used in construction building sites, oil fields, warehouses, freight yards
and logistics bases etc., to carry out lifting work, short distance transit and pick-and-carry
operations in narrow working areas.
RT60 rough terrain crane consists of the superstructure and special purpose chassis,
including power system, drive system, suspension system, steering system, brake system,
hoist gear, luffing gear, swing gear, boom system, turntable, chassis frame, outrigger,
hydraulic system, electrical system and cab etc.
Distinguishing characteristics:
Max. rated lifting capacity: 66.1 tn at 9.2 ft. (60 t at 3 m) radius
Max. lifting height: 148.95 ft. (45.4 m)
Max. traveling speed: 24.23 mph (39 km/h)
Three steering modes: 2-wheel steer (front wheel), 4-wheel steer and Crab steer
Overall dimensions: 44.8 ft. x 10.8 ft. x 12.3 (13662 × 3300 × 3750 mm) (Refer to Figure
09 – 1)
Deadweight: 48.8 tn (44.26 t)
Ability to pick-and-carry loads
Rough terrain travel performance
To Next Page
Loading...
