04 - 2 RT60 Rough Terrain Crane
4.2 SAFETY SYMBOL
The safety symbol, used on the Danger, Warning, and Caution labels, tells personnel
of possible death, injury, or property damage. Obey all safety data that follows this
symbol to prevent dangerous conditions.
4.3 Hazard classification
Hazard classification is a system to show different classes of possible injury levels. A
safety symbol and a signal word show how dangerous the level of possible injury can be.
A signal word without a safety symbol refers to property damage, protection devices, or
important data. You will find this system used in this manual and on signs on the crane to
help find and prevent dangerous situations.
4.4 SAFETY
This section contains the safety rules that you must follow. You must read and understand
the Operator’s Manual. It contains the instructions for the specified machine.
All personnel must be safe at the work location.
Attention
A. Moving personnel
Only use a crane to lift personnel when it is the less dangerous mode to move them to
areas that are hard to access.
B. Operator’s responsibilities
Read and understand the Operator's Manual.
The operator must always think about the safety of all personnel in the area.
Only personnel who show that they can safely control a RT75 crane can operate the
crane.
Comply with the requirements, that apply, as follows:
Occupational Safety and Health Administration (OSHA) standards
American National Standards Institute (ANSI)
China National Standards GB/T3811.
Make sure that all the mechanical functions of the crane can operate.
To Next Page
Loading...
Need help?
General
