Zte H1600 - Page 67

SJ-20210621164956-008 | 2022-09-01(R1.3)
59
5 Configure the Local Network
1. Click DHCP Binding to open the configuration, see Figure 5-17.
Figure 5-17 DHCP Binding Page
2. Configure the DHCP Binding parameters.
Table 5-8 lists the DHCP binding parameters.
Table 5-8 Parameter Descriptions for the DHCP Binding
Parameter
Description
Name
The name of the DHCP Binding.
MAC Address
The MAC address of the DHCP Binding.
IP Address
Binds an IP address in the DHCP address pool to the
specified MAC address.
3. Click Apply button to apply the changes.
Configure the Port Control
1. Click Port Control to open the configuration, see Figure 5-18.