Zte H1600 - Configure the VoIP Service

SJ-20210621164956-008 | 2022-09-01(R1.3)
69
6 Configure the VoIP
1. On the main page of the ZTE H1600 device, select VoIP > Telephony Ports to open
the Telephony Ports page, see Figure 6-3.
Figure 6-3 Telephony Ports Page
2. Set the parameters. For a description of the parameters, refer to Table 6-2.
Table 6-2 VoIP Services Parameter Descriptions
Parameter
Description
Hotline To
Hotline destination number.
HotLine
Hotline type.
Call Waiting
Enable or disable the call waiting service.
Incoming
SIP account for incoming calls.
Outgoing
SIP account for outgoing calls.
3. Click Apply button to apply the changes.
Steps