Zte ZXR10 5250-52TC - Page 236

ZXR105250SeriesCongurationGuide
CommandFunction
zte(cfg-group)#setztphop<1-128>Setsarange(hopcount)of
collectingtopologyinformation.
zte(cfg-group)#setztptimer<0-60>Setsatimeintervalforcollecting
topologyinformationautomatically.
zte(cfg-group)#setztpportdelay<1-100>Setsaportdelayforforwarding
topologyrequests.
zte(cfg-group)#setztphopdelay<1-1000>Setsahopdelayforforwarding
topologyrequests.
zte(cfg-group)#ztpstartStartscollectingtopology
information.
showztp(allcongurationmodes)DisplaysZTPglobalconguration.
showztpdevice[<idlist>](allcongurationmodes)Displaystheconguration
informationaccordingtothe
deviceID.
showztptopology(allcongurationmodes)Displaysnetworktopologyina
simplegraph.
showztpmac<HH.HH.HH.HH.HH.HH>(allcongurationmodes)Displaysdetailedinformationof
adeviceaccordingtotheMAC
address.
zte(cfg-group)#setgroupcommanderipport<0-63>[ip-pool
<A.B.C.D/M>]
Setsacommandswitch,species
alayer-3portnumberforcluster
managementandsetsanIP
addresspoolforclustermembers.
zte(cfg-group)#setgroupcandidateSetsaswitchtobeacandidate
switch.
zte(cfg-group)#setgroupindependentSetsaswitchtobeanindependent
switch.
zte(cfg-group)#setgroupadd{mac<HH.HH.HH.HH.HH.H
H>[<1-253>]|device<idlist>}
Addsaswitchtoacluster.
zte(cfg-group)#setgroupdeletemember<idlist>Deletesaswitchfromacluster.
zte(cfg-group)#setgrouphandtime<1-300>Setsatimeintervalforhandshake
betweenthecommandswitchand
thememberswitch.
zte(cfg-group)#setgroupholdtime<1-300>Setsholdtimeofinformationabout
switchesinacluster.
zte(cfg-group)#setgroupname<name>Setsaclustername.
6-24
SJ-20131111172707-002|2013-11-27(R1.0)ZTEProprietaryandCondential