ZyXEL Communications Dimension GS-3012 - Figure 15-4 Port Authentication: 802.1 X; Table 15-2 Port Authentication: 802.1 X

Dimension GS-3012 Gigabit Ethernet Switch
Port Authentication 15-3
Figure 15-4 Port Authentication: 802.1x
The following table describes the labels in this screen.
Table 15-2 Port Authentication: 802.1x
LABEL DESCRIPTION
Active Select this check box to permit 802.1x authentication on the switch.
You must first allow 802.1x authentication on the switch before configuring it on
each port.
Port This field displays a port number.
Active Select this checkbox to permit 802.1x authentication on this port. You must first allow 802.1x
authentication on the switch before configuring it on each port.
Reauthentication Specify if a subscriber has to periodically re-enter his or her username and password to stay
connected to the port.
Reauthentication
Timer
Specify how often a client has to re-enter his or her username and password to stay connected
to the port.
Apply Click Apply to save your changes back to the switch.
Cancel Click Cancel to begin configuring this screen afresh.