ZyXEL Communications ES-2024 Series - DSCP-to-IEEE 802.1 p Priority Settings

Chapter 29 Access Control
ES-2024 Series User’s Guide
214
29.3.4 Configuring SNMP
From the Access Control screen, display the SNMP screen. You can click Access Control to
go back to the Access Control screen.
Table 83 SNMP Switch Traps
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
stp STPNewRoot 1.3.6.1.2.1.17.0.1 This trap is sent when the STP root
switch changes.
MSTPNewRoot 1.3.6.1.4.1.890.1.5.8.16.107.7
0.1
1.3.6.1.4.1.890.1.5.8.27.107.7
0.1
This trap is sent when the MSTP
root switch changes.
STPTopologyChange 1.3.6.1.2.1.17.0.2 This trap is sent when the STP
topology changes.
MSTPTopologyChange 1.3.6.1.4.1.890.1.5.8.16.107.7
0.2
1.3.6.1.4.1.890.1.5.8.27.107.7
0.2
This trap is sent when the MSTP
root switch changes.
mactable MacTableFullEventOn 1.3.6.1.4.1.890.1.5.8.16.27.2.1
1.3.6.1.4.1.890.1.5.8.27.27.2.1
This trap is sent when more than
99% of the MAC table is used.
MacTableFullEventClear 1.3.6.1.4.1.890.1.5.8.16.27.2.2
1.3.6.1.4.1.890.1.5.8.27.27.2.2
This trap is sent when less than
95% of the MAC table is used.
rmon RmonRisingAlarm 1.3.6.1.4.1.890.1.5.1.1.15 This trap is sent when a variable
goes over the RMON "rising"
threshold.
RmonFallingAlarm 1.3.6.1.4.1.890.1.5.1.1.16 This trap is sent when the variable
falls below the RMON "falling"
threshold.