Chapter 3 Hardware Overview
ES-2024 Series User’s Guide
42
Figure 12 Opening the Transceiver’s Latch Example
2 Pull the transceiver out of the slot.
Figure 13 Transceiver Removal Example
3.2 Rear Panel
The following figures show the rear panel of the Switch. The power receptacle is on the rear
panel.
Figure 14 AC Rear Panel
Figure 15 DC Rear Panel
3.2.1 Power Connector
Make sure you are using the correct power source as shown on the panel.
To connect the power to the Switch, insert the female end of power cord to the power
receptacle on the rear panel. Connect the other end of the supplied power cord to the power
source.
To Next Page
Loading...
