ZyXEL Communications ES-2024 Series - IP Setup

Chapter 8 Basic Setting
ES-2024 Series User’s Guide
78
Figure 35 Basic Setting > IP Setup
The following table describes the labels in this screen.
Table 10 Basic Setting > IP Setup
LABEL DESCRIPTION
Domain Name
Server
DNS (Domain Name System) is for mapping a domain name to its corresponding IP
address and vice versa. Enter a domain name server IP address in order to be able to
use a domain name instead of an IP address.
Default Management IP Address
Configure the fields to set the default management IP address.
DHCP Client Select this option if you have a DHCP server that can assign the Switch an IP
address and subnet mask, a default gateway IP address and a domain name server
IP address.
Static IP
Address
Select this option if you don't have a DHCP server or if you wish to assign static IP
address information to the Switch. You need to fill in the following fields when you
select this option.
IP Address Enter the IP address of your Switch in dotted decimal notation for example
192.168.1.1.
IP Subnet
Mask
Enter the IP subnet mask of your Switch in dotted decimal notation for example
255.255.255.0.
Default
Gateway
Enter the IP address of the default outgoing gateway in dotted decimal notation, for
example 192.168.1.254