ZyXEL Communications ES-2024 Series - Figure 42 Advanced Application > VLAN: VLAN Status; Static VLAN Details; Static VLAN Status; Table 15 Advanced Application > VLAN: VLAN Status

Chapter 9 VLAN
ES-2024 Series User’s Guide
90
9.5.1 Static VLAN Status
See Section 9.1 on page 87 for more information on Static VLAN. Click Advanced
Application > VLAN from the navigation panel to display the VLAN Status screen as shown
next.
Figure 42 Advanced Application > VLAN: VLAN Status
The following table describes the labels in this screen.
9.5.2 Static VLAN Details
Use this screen to view detailed port settings and status of the VLAN group. See Section 9.1
on page 87 for more information on static VLAN. Click on an index number in the VLAN
Status screen to display VLAN details.
Table 15 Advanced Application > VLAN: VLAN Status
LABEL DESCRIPTION
VLAN Search
by VID
Enter an existing VLAN ID number(s) (separated by a comma) and click Search to
display only the specified VLAN(s) in the list below.
Leave this field blank and click Search to display all VLANs configured on the
Switch.
The Number of
VLAN
This is the number of VLANs configured on the Switch.
The Number of
Search Results
This is the number of VLANs that match the searching criteria and display in the list
below.
This field displays only when you use the Search button to look for certain VLANs.
Index This is the VLAN index number. Click on an index number to view more VLAN
details.
VID This is the VLAN identification number that was configured in the Static VLAN
screen.
Elapsed Time This field shows how long it has been since a normal VLAN was registered or a
static VLAN was set up.
Status This field shows how this VLAN was added to the Switch; Dynamic - using GVRP,
Static - added as a permanent entry or Other - added in another way such as via
Multicast VLAN Registration (MVR).
Change Pages Click Previous or Next to show the previous/next screen if all status information
cannot be seen in one screen.