IES-612-51A User’s Guide
125
CHAPTER 14
xDSL Profiles Setup
A profile is a list of settings that you define. Then you can assign them to one or more
individual ports. For background information about many of these settings, see Chapter 13 on
page 107.
14.1 Port Profile Screen
To open this screen, click Basic Setting, xDSL Profiles Setup.
Figure 55 Port Profile
The following table describes the labels in this screen.
Table 25 Port Profile
LABEL DESCRIPTION
VC Profile Click VC Profile to open the VC Profile screen where you can configure virtual
channel profiles (see Section 14.5 on page 131).
Alarm Profile Click Alarm Profile to open the Alarm Profile screen where you can configure
limits that trigger an alarm when exceeded (see Section 14.6 on page 133)
To Next Page
Loading...
