ZyXEL Communications IES-612-51A - DSL Port Disable Command; DSL Port Profile Show Command

Chapter 52 ADSL Commands
IES-612-51A User’s Guide
344
where
This command forcibly enables the specified DSL port(s).
52.1.3 DSL Port Disable Command
Syntax:
ras> adsl disable <portlist>
where
This command forcibly disables the specified DSL port(s).
" The factory default of all ports is enabled.
52.1.4 DSL Port Profile Show Command
Syntax:
ras> adsl profile show [profile]
where
This command displays the specified DSL profile or all DSL profiles if you do not specify
one.
<portlist> =
You can specify a single DSL port <1>, all DSL ports <*> or
a list of DSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
<portlist> =
You can specify a single DSL port <1>, all DSL ports <*> or
a list of DSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
<profile> =
A profile name.