ZyXEL Communications IES-612-51A - Alarm Profile Showmap Command; Figure 256 Alarm Profile Map Command Example; Figure 257 Alarm Profile Showmap Command Example

Chapter 52 ADSL Commands
IES-612-51A User’s Guide
373
Sets the IES-612-51A to use an (already-configured) alarm profile with the specified DSL
ports.
The following example sets the IES-612-51A to use the
SESalarm alarm profile with DSL
port 5.
52.3.5 Alarm Profile Showmap Command
Syntax:
ras> adsl alarmprofile showmap [profile]
where
Displays which alarm profiles the IES-612-51A is set to use for specific (or all) DSL ports.
The following example displays which alarm profile the IES-612-51A is set to use for DSL
port 5.
Figure 256 Alarm Profile Map Command Example
ras> adsl alarmprofile map SESalarm 5
[profile] = The name of an alarm profile.
Figure 257 Alarm Profile Showmap Command Example
ras> adsl alarmprofile showmap 5
ADSL alarm profile mapping:
Port 5: Alarm Profile = DEFVAL