ZyXEL Communications IES-612-51A - Chapter 53 Virtual Channel Management Commands; Virtual Channel Management Overview; Virtual Channel Profile Commands; Show Virtual Channel Profile Command

IES-612-51A User’s Guide
375
CHAPTER 53
Virtual Channel Management
Commands
This chapter shows you how to use commands to configure virtual channels.
53.1 Virtual Channel Management Overview
See Chapter 13 on page 107 for background information on virtual channels and ATM QoS.
53.2 Virtual Channel Profile Commands
Use the following commands to configure virtual channel profiles.
53.2.1 Show Virtual Channel Profile Command
Syntax:
ras> adsl vcprofile show [vcprofile]
where
Displays the settings of the specified virtual channel profile (or all of them if you do not
specify one).
53.2.2 Set Virtual Channel Profile Command
Syntax:
ras> adsl vcprofile set <vcprofile> <vc|llc> <ubr|cbr> <pcr> <cdvt>
ras> adsl vcprofile set <vcprofile> <vc|llc> <vbr(rt-vbr)|nrt-vbr> <pcr>
<cdvt> <scr> <bt>
[vcprofile] = The name of the virtual channel profile (up to 31 ASCII characters).