Chapter 5 Initial Configuration
IES-612-51A User’s Guide
72
9 Click All, and then click Apply. The VC Setup screen is updated.
Figure 25 VC Setup
10 Select Super Channel to allow the channel to forward frames belonging to multiple
VLAN groups (that are not assigned to other channels). Then, enter the VPI and VCI that
you use. Leave the other default settings, and click Add. The VC Setup screen is
updated.
Figure 26 VC Setup
11 Select the new channel’s Select radio button. Click Copy, and then click Paste. The
following screen appears. The following screen appears.
To Next Page
Loading...
