ZyXEL Communications IES-612-51A - ARP Show Command; ARP Flush Command; Statistics IP Command; Figure 197 ARP Show Command Example

Chapter 49 IP Commands
IES-612-51A User’s Guide
334
49.3.6 ARP Show Command
Syntax:
ras> ip arp show
This command displays the IES-612-51A’s IP Address Resolution Protocol table. This is the
list of IP addresses and matching MAC addresses that the IES-612-51A has resolved.
An example is shown next.
49.3.7 ARP Flush Command
Syntax:
ras> ip arp flush
This command clears the IES-612-51A’s IP Address Resolution Protocol table.
49.4 Statistics IP Command
Syntax:
ras> statistics ip
This command shows the statistics for the CPU IP traffic.
An example is shown next.
Figure 197 ARP Show Command Example
ras> ip arp show
ip mac address
--------------- -----------------
172.23.14.254 00:0c:db:30:ac:00
172.23.15.254 00:0c:db:30:ac:00
Figure 198 Statistics IP Command Example
ras> statistics ip
[Ethernet]
inet : 172.23.14.253 netmask: 0.0.0.0
broadcast: 172.23.255.255 mtu: 1500
in octet : 10728504 in unicast : 738 in multicast : 232488
in discard : 0 in error : 0 in unknown proto: 0
out octet : 41361 out unicast: 861 out multicast : 0
out discard: 0 out error : 0