ZyXEL Communications IES-612-51A - Page 263

Chapter 41 Commands Summary
IES-612-51A User’s Guide
263
rpvc delete <portlist> <vpi>
<vci>
Delete RPVC on a port H/H
rpvc show <portlist> Display RPVC on a port M/L
rpvc route set <port number>
<vpi> <vci> <ip>/
<netmask>
Set RPVC routing subnet on a
port
H/H
rpvc route delete <port number>
<vpi> <vci> <ip>/
<netmask>
Delete RPVC routing subnet on a
port
H/H
rpvc route show <portlist> Display RPVC routing subnet on a
port
M/L
rpvc arp agingtime
show
Display RPVC ARP proxy aging
time
H/H
rpvc arp agingtime
set
<sec,
10..10000|0:disabl
ed>
Set RPVC ARP proxy aging time M/L
rpvc arp flush Flush RPVC ARP proxy table H/H
rpvc arp show Show RPVC ARP proxy table M/L
paepvc delete <portlist> <vpi>
<vci>
Delete a PPPoAoE PVC M/H
paepvc set <portlist> <vpi>
<vci> <DS
vcprofile[,US
vcprofile]> <pvid>
<priority> [acname
<string32>]
[srvcname
<string32>]
[hellotime <time>]
Create/modify a PPPoAoE PVC
<acname>: access concentrator
name
<srvcname>: service name,
<time>: 0~600 in unit of second
Default: acname=“”, srvcname=””,
<time>=600
M/H
paepvc show Display PPPoAoE PVC setting by L/L
paepvc session <portlist> [<vpi>
<vci>]
Display PPPoAoE PVC session
status
L/L
paepvc counter <portlist> [<vpi>
<vci>]
Display PPPoAoE PVC counter L/L
tlspvc delete <portlist> <vpi>
<vci>
Delete a TLS PVC M/H
tlspvc set <portlist> <vpi>
<vci> <DS
vcprofile[,US
vcprofile]> <pvid>
<priority>
Create/modify a TLS PVC
<profile>:
<vid>: s-tag VLAN id
<priority>: priority for s-tag
M/H
tlspvc show portlist [detail] Display TLS PVC setting by ‘port’ L/L
queuemap show Displays the xDSL priority level to
physical queue mapping.
M/L
queuemap set <priority> <queue> Set the xDSL priority level to
physical queue mapping.
H/H
Table 88 Commands (continued)
CLASS COMMAND PARAMETERS DESCRIPTION P