ZyXEL Communications LTE3301 Series - IPv6 Firewall Rules; Chapter 16 IPv6 Firewall Overview; Chapter 16 IPv6 Firewall Screen

LTE3301 Series User’s Guide
112
CHAPTER 16
IPv6 Firewall
16.1 Overview
This chapter shows you how to enable and create IPv6 firewall rules to block unwanted IPv6 traffic.
16.2 IPv6 Firewall Screen
Click Configuration > Security > IPv6 Firewall. The Service screen appears as shown.
Figure 73 Configuration > Security > IPv6 Firewall
The following table describes the labels in this screen.
Table 50 Configuration > Security > IPv6 Firewall
LABEL DESCRIPTION
Enable Firewall Rule
Enable Firewall Rule Select this check box to activate the firewall rules that you define (see Add Firewall
Rule below).
Apply Click Apply to save the settings.
Add Firewall Rule
Service Name Enter a name that identifies or describes the firewall rule.
MAC Address Enter the MAC address of the computer for which the firewall rule applies.