Chapter 4 Tutorials
LTE3301 Series User’s Guide
32
3 Click Start buttons (or button next to the PIN field) on both the wireless client utility screen and the
LTE3301’s WPS Station screen within two minutes.
The LTE3301 authenticates the wireless client and sends the proper configuration settings to the
wireless client. This may take up to two minutes. Then the wireless client is able to communicate
with the LTE3301 securely.
The following figure shows you the example to set up wireless network and security on LTE3301
and wireless client (ex. NWD210N in this example) by using PIN method.
Figure 19 Example WPS Process: PIN Method
4.3 Connect to LTE3301 Wireless Network without WPS
This example shows you how to configure wireless security settings with the following parameters
on your LTE3301 and connect your computer to the LTE3301 wireless network.
Follow the steps below to configure the wireless settings on your LTE3301.
WITHIN 2 MINUTES
Wireless Client
Access Point
SSID SSID_Example3
Channel 6
Security WPA2-PSK
(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)
To Next Page
Loading...
