ZyXEL Communications LTE3301 Series - Web Configurator Easy Access

Chapter 18 Universal Plug-and-Play (UPnP)
LTE3301 Series User’s Guide
121
Figure 82 Internet Connection Properties: Advanced Settings: Add
Note: When the UPnP-enabled device is disconnected from your computer, all port
mappings will be deleted automatically.
5 Select Show icon in notification area when connected option and click OK. An icon displays in
the system tray.
Figure 83 System Tray Icon
6 Double-click on the icon to display your current Internet connection status.
Figure 84 Internet Connection Status
18.4.2 Web Configurator Easy Access
With UPnP, you can access the web-based configurator on the LTE3301 without finding out the IP
address of the LTE3301 first. This comes helpful if you do not know the IP address of the LTE3301.
Follow the steps below to access the web configurator.
1 Click Start and then Control Panel.
2 Double-click Network Connections.