LTE3301 Series User’s Guide
124
CHAPTER 19
TR-069
19.1 Overview
This chapter explains how to configure the LTE3301’s TR-069 auto-configuration settings.
19.2 TR-069 Screen
TR-069 defines how Customer Premise Equipment (CPE), for example your LTE3301, can be
managed over the WAN by an Auto Configuration Server (ACS). TR-069 is based on sending
Remote Procedure Calls (RPCs) between an ACS and a client device. RPCs are sent in Extensible
Markup Language (XML) format over HTTP or HTTPS.
An administrator can use an ACS to remotely set up the LTE3301, modify settings, perform
firmware upgrades as well as monitor and diagnose the LTE3301. You have to enable the device to
be managed by the ACS and specify the ACS IP address or domain name and username and
password.
Click Management > TR-069 to open the following screen. Use this screen to configure your
LTE3301 to be managed by an ACS.
Figure 88 Management > TR-069
To Next Page
Loading...
