ZyXEL Communications LTE3301 Series - Chapter 2 Web Configurator Status Screen

Chapter 2 Introducing the Web Configurator
LTE3301 Series User’s Guide
21
2.4 Status Screen
Click to open the status screen.
Dynamic
DNS
Dynamic DNS Use this screen to set up dynamic DNS.
Routing Static Route Use this screen to configure IP static routes.
Dynamic
Routing
Use this screen to enable and configure RIP on the LTE3301.
Interface
Group
Interface
Group
Use this screen to create a new interface group.
Security
Firewall General Use this screen to activate/deactivate the firewall.
Services This screen shows a summary of the firewall rules, and allows you to edit/
add a firewall rule.
Content
Filter
Content Filter Use this screen to restrict web features and designate a trusted computer.
You can also block certain web sites containing certain keywords in the
URL.
IPv6 firewall Services Use this screen to configure IPv6 firewall rules.
Management
Bandwidth
Management
General Use this screen to enable bandwidth management.
Advanced Use this screen to set the upstream bandwidth and edit a bandwidth
management rule.
UPnP UPnP Use this screen to enable UPnP on the LTE3301.
TR069 TR069 Use this screen to configure your LTE3301 to be managed by an ACS.
Maintenance
General General Use this screen to view and change administrative settings such as system
and domain names.
Account User Account Use this screen to change the user name and password of your LTE3301.
Time Time Setting Use this screen to change your LTE3301’s time and date.
Firmware
Upgrade
Firmware
Upgrade
Use this screen to upload firmware to your LTE3301.
Backup/
Restore
Backup/
Restore
Use this screen to backup and restore the configuration or reset the factory
defaults to your LTE3301.
Restart System
Restart
This screen allows you to reboot the LTE3301 without turning the power
off.
Table 6 Navigation Panel (continued)
LINK TAB FUNCTION