ZyXEL Communications LTE3301 Series - Bandwidth Management Settings; Chapter 17 Bandwidth Management Overview

LTE3301 Series User’s Guide
114
CHAPTER 17
Bandwidth Management
17.1 Overview
This chapter contains information about configuring bandwidth management and editing rules.
ZyXEL’s Bandwidth Management allows you to specify bandwidth management rules based on an
application.
In the figure below, uplink traffic goes from the LAN device (A) to the WAN device (B). Bandwidth
management is applied before sending the packets out to the WAN. Downlink traffic comes back
from the WAN device (B) to the LAN device (A). Bandwidth management is applied before sending
the traffic out to LAN.
Figure 74 Bandwidth Management Example
You can allocate specific amounts of bandwidth capacity (bandwidth budgets) to individual
applications (like VoIP, Web, FTP, and E-mail for example).
17.2 What You Can Do
•Use the General screen to enable bandwidth management and assign bandwidth values (Section
17.4 on page 115).
•Use the Advanced screen to configure bandwidth managements rule for the services and
applications (Section 17.5 on page 116).
A
B
-> VOIP
-> FTP
-> HTTP
-> Chat, Email