LTE3301 Series User’s Guide
99
CHAPTER 12
Routing
12.1 Overview
This chapter shows you how to configure static routes for your LTE3301.
The LTE3301 usually uses the default gateway to route outbound traffic from computers on the LAN
to the Internet. To have the LTE3301 send data to devices not reachable through the default
gateway, use static routes.
For example, the next figure shows a computer (A) connected to the LTE3301’s LAN interface. The
LTE3301 routes most traffic from A to the Internet through the LTE3301’s default gateway (R1).
You create one static route to connect to services offered by your ISP behind router R2. You create
another static route to communicate with a separate network behind a router R3 connected to the
LAN.
Figure 63 Example of Static Routing Topology
12.2 Static Route Screen
Click Network > Routing > Static Route to open the Static Route screen.
To Next Page
Loading...
