Chapter 20 Maintenance
LTE3301 Series User’s Guide
127
The following table describes the labels in this screen.
20.4 Account Screen
It is strongly recommended that you change your LTE3301's system password.
If you forget your LTE3301's password (or IP address), you will need to reset the device. See
Section 20.8 on page 133 for details.
Click Account > Account. The screen appears as shown.
Figure 90 Maintenance > Account
The following table describes the labels in this screen.
20.4.1 Edit a User Account
Use this screen to edit a users account. Click the Edit icon next to the user account you want to
configure. The screen shown next appears.
Table 56 Maintenance > General
LABEL DESCRIPTION
System Name System Name is a unique name to identify the LTE3301 in an Ethernet network.
Domain Name Enter the domain name you want to give to the LTE3301.
Administrator
Inactivity Timer
Type how many minutes a management session can be left idle before the session times
out. The default is 300 seconds. After it times out you have to log in with your password
again. Very long idle timeouts may have security risks. A value of "0" means a
management session never times out, no matter how long it has been left idle (not
recommended).
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Cancel to begin configuring this screen afresh.
Table 57 Maintenance > Account
LABEL DESCRIPTION
# This is the index number of the entry.
User Name This field displays the name of the user.
Group This field displays the login account type of the user.
Modify Click the Edit icon to edit this user account.
To Next Page
Loading...
