ZyXEL Communications LTE5388-M804 - Page 40

Chapter 2 The Web Configurator
LTE Series User’s Guide
40
Routing Static Route Use this screen to view and set up static routes on the Zyxel Device.
DNS Route
Use this screen to forward DNS queries for certain domain names through
a specific WAN interface to its DNS server(s).
Policy Route
Use this screen to configure policy routing on the Zyxel Device.
RIP Use this screen to configure Routing Information Protocol to exchange
routing information with other routers.
NAT Port Forwarding Use this screen to make your local servers visible to the outside world.
Port Triggering Use this screen to change your Zyxel Device’s port triggering settings.
DMZ Use this screen to configure a default server which receives packets from
ports that are not specified in the Port Forwarding screen.
ALG Use this screen to enable or disable SIP ALG.
Address Mapping Use this screen to change your Zyxel Device's IP address mapping
settings.
Sessions Use this screen to limit the number of NAT sessions each client can use.
DNS DNS Entry Use this screen to view and configure DNS routes.
Dynamic DNS Use this screen to allow a static hostname alias for a dynamic IP address.
USB USB Service Use this screen to enable file sharing via the Zyxel Device.
Security
Firewall General Use this screen to configure the security level of your firewall.
Protocol Use this screen to add Internet services and configure firewall rules.
Access Control Use this screen to enable specific traffic directions for network services.
DoS Use this screen to activate protection against Denial of Service (DoS)
attacks.
MAC Filter MAC Filter Use this screen to block or allow traffic from devices of certain MAC
addresses to the Zyxel Device.
Parental
Control
Parental Control Use this screen to define time periods and days during which the Zyxel
Device performs parental control and/or block web sites with the
specific URL.
Certificates Local Certificates Use this screen to view a summary list of certificates and manage
certificates and certification requests.
Trusted CA
Use this screen to view and manage the list of the trusted CAs.
Voice Voice Mode Use this screen to enable the Voice Mode on the Zyxel Device.
SIP Use this screen to set up information about your SIP account.
Phone Use this screen to change settings that depend on the country you are
in.
Call Rule Use this screen to add, edit, or remove speed-dial numbers for outgoing
calls.
Call History Use this screen to view a call history list.
System Monitor
Table 11 Navigation Panel Summary (continued)
LINK TAB FUNCTION