Chapter 4 Tutorials
LTE Series User’s Guide
67
To configure a static route to route traffic from N1 to N2:
1 Log into the Zyxel Device’s Web Configurator.
2 Go to Network Setting > Routing > Static Route screen.
3 Click Add New Static Route in the Static Route screen.
4 Configure the Static Route Setup screen using the following settings:
4a Type 192.168.10.2 and subnet mask 255.255.255.0 for the destination, N2.
4b Type 192.168.1.253 (R’s N1 address) in the Gateway IP Address field.
4c Click OK.
Now B should be able to receive traffic from A. You may need to additionally configure B’s firewall
settings to allow specific traffic to pass through.
To Next Page
Loading...
