Chapter 6 Broadband
LTE Series User’s Guide
95
The following table describes the labels in this screen.
After selecting to disable the following warning appears. Click OK to continue.
Figure 66 Network Setting > Broadband > Cellular PLMN > Manual Scan Warning
Click Scan to check for available PLMNs in the area surrounding theZyxel Device, and then display them
in the network list. Select from the network list and click Apply.
Table 25 Network Setting > Broadband > Cellular PLMN
LABEL DESCRIPTION
PLMN Management
PLMN Auto Selection Click to enable ( ) and have the Zyxel Device automatically connect to the first
available mobile network.
Select disabled to display the network list and manually select a preferred network.
Apply Click Apply to save your changes back to the Zyxel Device.
Cancel Click Cancel to exit this screen without saving.
To Next Page
Loading...
