Chapter 7 Control Panel: Privilege and Sharing
NAS Series User’s Guide
107
7.3.2 Add an Account
Use this screen to create a NAS user account with NAS access password. Click the Add User button in
the Users screen to open the following screens.
Step 1 General Settings
Figure 76 Control Panel > Privilege and Sharing > Users > Add a User: General Settings
The following table describes the labels in this screen.
Username This field displays the username of each account.
Description This field displays the description of each account.
Table 57 Control Panel > Privilege and Sharing > Users (continued)
LABEL DESCRIPTION
Table 58 Control Panel > Privilege and Sharing > Users > Add a User: General Settings
LABEL DESCRIPTION
Account Type Select Administrator to give the account full configuration and management access to
the NAS.
Select User to give the account basic access rights to the NAS and allow the user to
manage his own shares, change his own password, and access the contents of other
shares to which he is given access rights.
Username Type a name from 1 to 32 single-byte (no Chinese characters allowed for example)
ASCII characters. See Section 7.3 on page 104 for more details on usernames.
Description Type the description for this account.
Password Create a password associated with this user. You can type from one to 14 single-byte
(no Chinese characters allowed for example) ASCII characters.
Confirm Password You must type the exact same password that you just typed in the above field.
To Next Page
Loading...
