ZyXEL Communications NAS326-2T - Log Report Configuration Screen

Chapter 11 Control Panel: Maintenance
NAS Series User’s Guide
182
Figure 147 Control Panel > Service > Maintenance > Log
The following table describes the labels in this screen.
11.4.1 Log Report Configuration Screen
In the Log screen, click Report Config to do the following:
• Use the Email Setting screen (Section 11.4.2 on page 183) to enable and configure e-mail alerts from
the NAS.
• Use the Report Setting screen (Section 11.4.3 on page 184) to select the type of alerts you want to
receive through e-mail and schedule when the NAS e-mails the alerts.
Table 107 Control Panel > Service > Maintenance > Log
LABEL DESCRIPTION
Refresh Click this to update the log display.
Purge all Logs Click this to erase all logs from the NAS.
Report Config Click this to open a screen where you can configure email alerts for logs. Refer to Section 11.4.1
on page 182 to see the screens for this.
The screen always shows all logs by default. Choose a specific log category to view logs for just that category.
# This is the log entry’s number in the list according to the currently selected sort order.
Time This shows the date and time the log was created. Click the top of the column to sort by oldest or
newest.
Class This displays the log category; see Table 111 on page 189 for details.
Severity This displays how serious the log is rated by the NAS. See Table 112 on page 189 for more
information.
Message This displays a description of the log. Click the top of the column to sort by alphabetical or
reverse alphabetical order.