Chapter 16 Backup Planner
NAS Series User’s Guide
280
16.3.3 Restore Screens
Use these screens to restore previous backups made with the NAS. Click Backup Planner > Backup >
Restore to open the following screen.
Click the Restore icon to create a restore job.
Figure 224 Backup Planner > Backup > Restore
Restore Job: Action
You can restore a previous backup by selecting a backup job configured on the NAS or the backup
file(s). Click Next to continue.
Data compression This field is read-only and shows whether the backup employs compression.
Compression reduces the size of the file that you want to back up. Backup is then faster, but
restoring may be slower, so if backup space is not a concern and recovery speed is, then
turn off compression.
Data encryption This field is read-only and shows whether the backup employs encryption.
You can have the NAS use a password to encrypt the backup files.
Apply Click this to save your changes.
Cancel Click this to close the screen without saving.
Table 156 Backup Planner > Backup > Edit Job: Schedule and Options (continued)
LABEL DESCRIPTION
To Next Page
Loading...
