Chapter 10 Control Panel: Service
NAS Series User’s Guide
172
The following table describes the labels in this screen.
10.9.1 Print Server Edit
Click Control Panel > Service > Print Server and a printer’s Edit icon to open the following screen. Use this
screen to change the name the NAS uses for the printer.
Figure 140 Control Panel > Service > Print Server > Edit
The following table describes the labels in this screen.
10.10 Syslog Server Screen
Use this screen to configure the NAS to accept syslog logs from syslog clients such as Zyxel’s G-4100 v2.
Table 101 Control Panel > Service > Print Server
LABEL DESCRIPTION
Edit Select a printer and click this to change the name the NAS uses for the printer.
Delete Select a printer and click this to remove a printer from the NAS’s printer list. To add the printer back
into the list, disconnect the printer from the NAS’s USB port and reconnect it. If that does not work,
disconnect the USB port and turn off the printer’s power. Then reconnect the printer and turn it back
on.
Cancel Job Select a printer and click this to remove all print jobs from the NAS queue for a particular printer.
However, since the NAS sends print jobs to the printer as soon as it can, this button may only have an
effect if there are very large or many print jobs in the queue. To stop a print job that has already
started, you may have to turn off the printer.
Refresh Click this to update the list of printers and print jobs.
The table lists printers and their queued print jobs. Click a column’s heading to sort the entries by that
criteria.
Status This fields shows whether the printer is connected and turned on (on-line) or not (off-line).
Name This identifies the printer. Each printer connected to the NAS must use a unique name.
Table 102 Control Panel > Service > Print Server > Edit
LABEL DESCRIPTION
Name Type a new name to identify the printer. The name must be unique from all the other names of printers
connected to the NAS.
Apply Click this to save your changes.
Cancel Click this to return to the previous screen without saving.
To Next Page
Loading...
