Chapter 11 Control Panel: Maintenance
NAS Series User’s Guide
184
11.4.3 Report Setting
You can have the NAS email you alerts and reports. In the Log Report Configuration screen, click the
Report Setting tab to open the following screen.
Figure 149 Control Panel > Service > Maintenance > Log > Report Config: Report Setting
The following table describes the labels in this screen.
11.4.4 Syslog Server Setting
You can enable the syslog server and select the categories to include in the log report. In the Log Report
Configuration screen, click the Syslog Server Setting tab to open the following screen.
Table 109 Control Panel > Service > Maintenance > Log > Report Config: Report Setting
LABEL DESCRIPTION
Email Alert Select the Enable Email Log check box to have the NAS send an alert email to the configured
email address whenever the NAS generates a critical severity log.
Report Time Select how often (Weekly, Daily or Hourly), the day of the week (for weekly reports), and the time
(hour:minutes) the NAS sends a report email.
Enable Email
Log
Select the check box to have the NAS email reports of all logs the NAS generates to the
configured email address.
Apply Click this to save your changes.
Cancel Click this to return to the previous screen without saving.
To Next Page
Loading...
