ZyXEL Communications NAS326-2T - Configure Copy Settings; Copy;Sync Button Screens

Chapter 16 Backup Planner
NAS Series User’s Guide
286
16.4 Copy/Sync Button Screens
The Copy/Sync button on the front panel allows you to copy or synchronize files between a connected
USB or SD device and the NAS. Use the Backup Planner > Copy/Sync Button screen to configure the
copy/sync settings.
16.4.1 Configure Copy Settings
Click Backup Planner > Copy/Sync Button > Copy Settings to open the following screen.
Figure 235 Backup Planner > Copy/Sync Button > Copy Settings
The following table describes the labels in this screen.
Table 157 Backup Planner > Copy/Sync Button > Copy Settings
LABEL DESCRIPTION
NAS Copy Target Select the NAS share to use with the copy function.
USB Volume If your USB or SD device has multiple partitions, select which partition to use with the copy
function.
Copy Direction Select USB -> NAS to copy files from your USB or SD device to the NAS.
Select NAS -> USB to copy files from the NAS to your USB or SD device.
Create a New Folder
for Copied Files
Select this option to place the copied files in a new folder.
The name of the folder created for the copied files consists of the date and time of the
copy in year_month_day_hour_minute_second format.
Backup Files to be
Replaced
This option is only available if you do not select Create a New Folder for Copied Files. Select
this option to save the files that will be replaced by the source files.