ZyXEL Communications NAS326-2T - Configure Date;Time; Date;Time Screen

Chapter 9 Control Panel: System
NAS Series User’s Guide
149
9.5 Date/Time Screen
Use this screen to select a time zone and a time server from which your NAS can get the time and date.
This time is then used in NAS logs and alerts.
9.5.1 Configure Date/Time
Click the Control Panel > System link in the navigation panel and then click the Date/Time link to access
the Date/Time screen.
Figure 116 Control Panel > System > Date/Time
The following table describes the labels in this screen.
Table 87 Control Panel > System > Date/Time
LABEL DESCRIPTION
Current system
date/time
This field displays the current date and time used by your NAS for its logs and alerts.
Time Zone Choose the time zone of your location. This will set the time difference between your time
zone and Greenwich Mean Time (GMT).
Date/time setting
Manually Select this radio button to enter the time and date manually.
When you enter the time settings manually, the NAS uses the new setting once you click
Apply.
Note: If you enter time settings manually, they revert to their defaults when power is
lost.