Chapter 9 Control Panel: System
NAS Series User’s Guide
152
Figure 118 Control Panel > System > FW Upgrade > Latest Firmware Check
The following table describes the labels in this screen.
9.6.2 Manual Firmware Upgrade
You can also download the firmware from the Zyxel website and upgrade the firmware manually. Click
Control Panel > System > FW Upgrade > Manual Firmware Upgrade to show the following screen.
Table 89 Control Panel > System > FW Upgrade > Latest Firmware Check
LABEL DESCRIPTION
Model Name Displays the model name of you NAS
Current Firmware
Version
Displays the current firmware version of your NAS
Last Check Displays the last checking time. If no, it is blank.
Check Now Click this to check Zyxel’s server for updated firmware.
Periodically Check for
Latest Firmware
Automatically
Select this to have the NAS regularly check Zyxel’s server for updated firmware. The NAS
notifies you at login if a new firmware is available.
Click Apply to save this field’s setting.
Status Displays the firmware checking status or error messages. If there is no previous checking
information, it displays --.
Upgrade Now Click this to upload the new firmware. The NAS automatically restarts after you upgrade.
Wait until the restart completes before accessing the NAS again. If you interrupt the
upgrade, then the NAS may become unusable. See Section 1.2 on page 14 for your
model’s LED behavior during firmware upgrade.
Reset Click this to refresh the screen.
To Next Page
Loading...
