Chapter 16 Backup Planner
NAS Series User’s Guide
279
Figure 223 Backup Planner > Backup > Edit Job: Schedule and Options
The following table describes the labels in this screen.
Table 156 Backup Planner > Backup > Edit Job: Schedule and Options
LABEL DESCRIPTION
Schedule
Frequency Select from Hourly, Daily, Weekly and Monthly backup intervals. The screen changes
depending on the item you select.
Every n hours? This is only available if you selected Hourly as your backup frequency.
Specify every how many hours the NAS performs the backup job.
Execute time This is available if you selected Daily, Weekly or Monthly as your backup frequency.
Select the time in hour:minute format when you want the NAS to perform the backup job.
Every n day(s) This is only available if you selected Daily as your backup frequency.
Enter the interval between days when the NAS performs the backup job.
Every n week(s) This is only available if you selected Weekly as your backup frequency.
Enter the interval between weeks when NAS performs the backup job.
On This is only available if you selected Weekly as your backup frequency.
Enter the day of the week when you want the NAS to perform the backup job.
January ~
December
This is only available if you selected Monthly as your backup frequency.
Select the month(s) when you want the NAS to perform the backup job.
Day This is only available if you selected Monthly as your backup frequency.
Specify or select the day in a month when you want the NAS to perform the backup job.
Bandwidth This field is available only when the backup type is Synchronization or Rsync and the
backup target is a remote NAS.
For backups to a remote NAS, you can restrict the bandwidth to help prevent the backups
from using all of your network connection’s available bandwidth. This is more important
when backing up to a remote NAS or computer through the Internet.
To Next Page
Loading...
