Chapter 5 Storage Manager
NAS Series User’s Guide
64
The following table describes the labels in this screen.
Step 2 Summary
Figure 50 Create a Volume on an Existing Disk Group: Summary
The following table describes the labels in this screen.
Table 24 Create a Volume on Disk Group: Create Volume
LABEL DESCRIPTION
Disk group information
Name This field displays the name of the disk group.
Unallocated capacity This field displays the percentage of the available size, the size in use, and total size of
the disk group.
Create Volume
Volume Name This field displays the default name of the volume. You can also type a new name for
the volume.
Allocated Volume Size This field displays the number of Gigabytes available on the volume by default. You
can change the size to allocate to this volume. Click MAX to allocate all available
size of the disk group to the volume.
Back Click Back to go to the previous step.
Next Click Next to go to the next step.
Cancel Click Cancel to close the screen without saving any settings.
Table 25 Create a Volume on Disk Group: Summary
LABEL DESCRIPTION
Volume Type This field displays the type of the volume, Multiple volumes on RAID (Disk Group X) where
Disk Group X is the disk group’s name.
Volume Name This field displays the name of the volume.
Volume Capacity This field displays the size of the volume.
To Next Page
Loading...
