Chapter 5 Storage Manager
NAS Series User’s Guide
69
5.3.1.10 Edit a Volume on Disk Group
Use the Edit Volume on Disk Group screen to expand a volume’s capacity. In the Storage Manager >
Internal Storage > Volume screen, select a volume and then click Edit in the Volume on Disk Group
section to open the screen as shown.
Figure 55 Edit Volume on Disk Group
The following table describes the labels in this screen.
Volume Type This field displays the type of the volume, Multiple volumes on RAID (Disk Group X) where
Disk Group X is the disk group’s name.
Volume Name This field displays the name of the volume.
Volume Capacity This field displays the size of the volume.
Back Click Back to go to the previous step.
Apply Click Apply to save the settings.
Cancel Click Cancel to close the screen without saving any settings.
Table 28 Create Volume on Disk Group: Summary (continued)
LABEL DESCRIPTION
Table 29 Edit Volume on Disk Group
LABEL DESCRIPTION
Unallocated
capacity on Disk
Group X
This field displays the percentage of the disk group size unallocated to other volumes, the size in
use, and total size of the disk group.
Current volume
size
This field displays the total size of the volume, excluding the file system size.
New volume size This field displays the smallest size to which you can expand the volume (this includes the
volume’s current available size, file system size, and a minimum additional capacity for
expansion). You can enter a bigger number or click MAX to allocate all the rest of the space in
the disk group to the volume.
Apply Click Apply to save the settings.
Cancel Click Cancel to close the screen without saving any settings.
To Next Page
Loading...
