NWA50AX/NWA90AX/NWA55AXE Series User’s Guide
196
CHAPTER 22
Cloud Mode
22.1 Overview
The Zyxel Device is managed and provisioned automatically by the NCC (Nebula Control Center) when
it is connected to the Internet and has been registered in the NCC. If you need to change the Zyxel
Device’s VLAN setting or manually set its IP address, access its simplified web configurator (see Chapter
4 on page 31). You can check the NCC's Access Point > Monitor > Access Points screen or the
connected gateway for the Zyxel Device's current LAN IP address. Alternatively, disconnect the
gateway or disable its DHCP server function and use the Zyxel Device's default static LAN IP address
(192.168.1.2).
Figure 128 Cloud Mode Application
22.2 Cloud Mode Web Configurator Screens
When your Zyxel Device is managed through NCC, you can access only the following screens through
the Web Configurator:
• Dashboard
• Configuration > Network > IP Setting
• Configuration > Network > VLAN
To Next Page
Loading...
