Chapter 7 Setup Wizard
NWA50AX/NWA90AX/NWA55AXE Series User’s Guide
53
Figure 31 Wizard: Change Password and Uplink Connection
7.2.3 Step 3 Radio
Use this screen to configure the Zyxel Device’s radio transmitter(s).
• Channel Selection: Select Auto to have the Zyxel Device automatically choose a radio channel that
has least interference. Otherwise, select Manual and specify a channel the Zyxel Device will use in the
2.4 GHz or 5 GHz wireless LAN. The options vary depending on the frequency band and the country
you are in.
• Maximum Output Power: Enter the maximum output power of the Zyxel Device. If there is a high
density of APs in an area, decrease the output power of the Zyxel Device to reduce interference with
other APs.
Note: Reducing the output power also reduces the Zyxel Device’s effective broadcast radius.
Click Prev to return to the previous screen. Click Next to proceed. Click Cancel to close the wizard
without saving.
Figure 32 Wizard: Radio
To Next Page
Loading...
